Solo Blue 997

Good protection for handling of small parts in mechanical industry

  • Excellent dexterity thanks to flexibility and reduced material thickness
  • Worn alone or as an outer-glove
  • Recommended for oily environments in industry

Applications

  • Automotive/mechanical industry
    • Assembly of small oily parts
  • Aeronautics industry
    • Work with composite materials (resins)
  • Laboratory
    • Manufacturing of medicines
    • Pharmaceutical preparation
    • Research, analysis, handling of precision parts

Product details

  • Cat. 3
  • Specific Chemical Protection EN 374
    JKT
  • Micro-organisms EN 374
Material Nitrile
Colour Blue
Interior Finish Chlorinated
Exterior Finish Smooth with pebbled fingertips
Length (cm) 24
Thickness (mm) 0.1
Size 6 7 8 9
Packaging 100 gloves/box
1000 gloves/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the «CE»-type tests.
  • It is not recommended to persons sensitized to dithhiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
  • These gloves are designed for single use only.
  • Do not touch the external side of the gloves when taking them off. Fold back the cuff end and pull them off while turning them inside out.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
2-Propanol (Isopropanol) 99% 67-63-0 30 1 ASTM F739 3
=
Acetic acid 50% 64-19-7 34 2 ASTM F739 2
=
Acetic acid 99% 64-19-7 4 0 ASTM F739 NT
NA
Acetone 99% 67-64-1 1 0 ASTM F739 1
-
Acetonitrile 99% 75-05-8 1 0 ASTM F739 NT
NA
Ammonium hydroxide solution 29% 1336-21-6 13 1 ASTM F739 4
+
Amyl Alcohol 99% 71-41-0 69 3 ASTM F739 NT
NA
Carbon Tetrachloride 99% 56-23-5 3 0 ASTM F739 NT
NA
Dichloromethane (Methylene Chloride) 99% 75-09-2 NT 0 ASTM F739 1
-
Diethylamine 98% 109-89-7 1 0 ASTM F739 NT
NA
Dimethylsulfoxide 99% 67-68-5 21 1 ASTM F739 NT
NA
Ethanol 70% 64-17-5 22 1 EN 374-3:2003 NT
NA
Ethanol 95% 64-17-5 11 1 ASTM F739 NT
NA
Formic Acid 96% 64-18-6 3 0 ASTM F739 NT
NA
Hydrochloric acid 10% 7647-01-0 NT NT 4
NA
Hydrochloric acid 35% 7647-01-0 53 2 EN 374-3:2003 4
+
Hydrochloric acid 37% 7647-01-0 60 2 ASTM F739 4
+
Hydrofluoric Acid 10% 7664-39-3 NT NT 4
NA
Hydrofluoric Acid 49% 7664-39-3 10 0 ASTM F739 4
=
Hydrogen peroxide 30% 7722-84-1 480 6 ASTM F739 4
++
Methanol 99% 67-56-1 4 0 ASTM F739 3
=
n-Butanol 99% 71-36-3 41 2 ASTM F739 NT
NA
n-Heptane 99% 142-82-5 8 0 EN 374-3:2003 NT
NA
Naphtha Heavy mixture 68551-17-7 107 3 ASTM F739 4
++
Naphtha VM&P mixture 8032-32-4 27 1 ASTM F739 NT
NA
Nitric acid 50% 7697-37-2 27 1 ASTM F739 1
-
p-dioxane (1,4-Dioxane) 99% 123-91-1 2 0 ASTM F739 NT
NA
Phenol 50% 108-95-2 3 0 ASTM F739 NT
NA
Phenol 85% 108-95-2 NT NT 1
NA
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 4
++
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Sodium Hypochlorite 5% 10022-70-5 480 6 ASTM F739 NT
NA
Sulfuric acid 10% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 40% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 50% 7664-93-9 480 6 ASTM F739 4
++
Toluene 99% 108-88-3 1 0 ASTM F739 1
-
Unleaded gasoline mixture 8006-61-9 4 0 ASTM F739 NT
NA
Xylene 99% 1330-20-7 2 0 ASTM F739 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.