Trionic 522

A tripolymer exclusive that offers 100% comfort for optimal mechanical and chemical resistance

  • Excellent resistance and strong chemical protection against a great number of chemical products: exclusive Trionic formula made from a mix of natural latex, neoprene and nitrile
  • Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system)
  • Extended length to protect the forearm

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    1110
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
Material Natural latex, neoprene and nitrile
Colour Non pigmented
Interior Finish Chlorinated
Exterior Finish Embossed texture
Length (cm) 61
Thickness (mm) 0.50
Size 8 9 10
Packaging 1 pair/bag
6 pairs/bag
48 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Unpack and put on the gloves according to the gowning procedure in the workplace.
  • Inspect the gloves for any cracks and flaws before use.
  • Put the gloves on dry, clean hands. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Do not touch the external side of the gloves when taking them off.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1-Trichloroethane 99% 71-55-6 7 0 ASTM F739 NT
NA
1,1,1,2,2,3,4,5,5,5-Decafluoropentane 97% 138495-42-8 13 1 ASTM F739 NT
NA
1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99% 76-13-1 20 1 ASTM F739 1
-
1,2 Dichloroethylene 98% 156-60-5 2 0 ASTM F739 2
-
1,3 Ethoxy propionate (Ethyl 3-ethoxypropionate) 99% 763-69-9 480 6 ASTM F739 NT
NA
2-Butoxyethanol (Butyl Cellusolve) 99% 111-76-2 53 2 ASTM F739 NT
NA
2-Butoxyethylacetate (Butyl cellosolve acetate) 85% 112-07-2 35 2 ASTM F739 NT
NA
2-Ethoxyethanol (Cellosolve) 99% 110-80-5 27 1 ASTM F739 NT
NA
2-Ethoxyethyl acetate (Cellosolve Acetate) 99% 111-15-9 14 1 ASTM F739 4
+
2-Methoxyethanol (Methyl Cellosolve) 99% 109-86-4 40 2 ASTM F739 NT
NA
2-Methoxyethanol Acetate (Methyl cellosolve acetate) 98% 110-49-6 27 1 ASTM F739 NT
NA
2-Propanol (Isopropanol) 99% 67-63-0 38 2 ASTM F739 4
+
4,4 - diamino diphenylsulfone 97% 80-008-0 480 6 ASTM F739 NT
NA
4,4'-Methylenedianiline (MDA) 15% and 15% Methanol mixture 101-77-9 19 1 ASTM F739 NT
NA
4,4'-Methylenedianiline (MDA) 15% in Toluene mixture 101-77-9 15 1 ASTM F739 NT
NA
Acetic acid 10% 64-19-7 NT NT 4
NA
Acetic acid 50% 64-19-7 NT NT 4
NA
Acetic acid 99% 64-19-7 32 2 ASTM F739 4
+
Acetone 99% 67-64-1 6 0 ASTM F739 4
=
Aluminum Etch mixture NA 960 5 ASTM F739 4
++
Aluminum Oxide mixture NA 55 2 ASTM F739 NT
NA
Ammonium Fluoride 40% 12125-01-8 480 6 ASTM F739 NT
NA
Ammonium Fluoride 79% 12125-01-8 480 6 ASTM F739 NT
NA
Ammonium hydroxide solution 29% 1336-21-6 36 2 ASTM F739 4
+
Baker PRS-1000 mixture NA 20 1 ASTM F739 NT
NA
Baker PRS-2000 mixture NA 130 4 ASTM F739 NT
NA
Baker PRS-3000 mixture NA 480 6 ASTM F739 NT
NA
Benzene 99% 71-43-2 4 0 ASTM F739 1
-
Buffered Oxide Etch mixture NA 480 6 ASTM F739 4
++
Butyl Acetate 99% 123-86-4 7 0 ASTM F739 4
=
Chromic Acid 50% 7738-94-5 60 2 ASTM F739 NT
NA
Cyclohexanone 99% 108-94-1 23 1 ASTM F739 1
-
Cyclopentanone 99% 120-92-3 11 1 ASTM F739 NT
NA
Dichloromethane (Methylene Chloride) 99% 75-09-2 4 0 ASTM F739 NT
NA
Dichromate cleaning solution mixture NA 480 6 ASTM F739 4
++
Diethylamine 98% 109-89-7 4 0 ASTM F739 NT
NA
Diglycidal ether of bisphenol 100% 25068-38-6 480 6 ASTM F739 NT
NA
Dimethylamine 35% 124-40-3 53 2 ASTM F739 NT
NA
Dimethylformamide 99% 68-12-2 8 0 ASTM F739 NT
NA
Dimethylsulfoxide 99% 67-68-5 181 4 ASTM F739 4
++
Epichlorohydrin 99% 106-89-8 4 0 ASTM F739 NT
NA
Ethanol 95% 64-17-5 21 1 ASTM F739 NT
NA
Ethyl lactate 95% 97-64-3 29 1 ASTM F739 NT
NA
Ethylene glycol 99% 107-21-1 480 6 ASTM F739 4
++
Hexamethyldisilazane (HMDS) 98% 999-97-3 18 1 ASTM F739 1
-
Hydrochloric acid 10% 7647-01-0 480 6 EN 374-3:2003 4
++
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 454 5 ASTM F739 4
++
Hydrofluoric Acid 10% 7664-39-3 480 6 EN 374-3:2003 4
++
Hydrofluoric Acid 49% 7664-39-3 390 5 ASTM F739 NT
NA
Hydrogen peroxide 30% 7722-84-1 960 5 ASTM F739 4
++
Hydrotreated Light Naphthenic Distillate mixture 64742-53-6 161 4 ASTM F739 2
+
Kerosene mixture 8008-20-6 26 1 ASTM F739 1
-
KOH Etch mixture NA 278 5 ASTM F739 4
++
KTI Pad Etch mixture NA 480 6 ASTM F739 NT
NA
KTI Silicon Etch mixture NA 480 6 ASTM F739 NT
NA
Methanesulfonic Acid 99% 75-75-2 NT NT 4
NA
Methanol 85% 67-56-1 19 1 ASTM F739 4
+
Methanol 99% 67-56-1 NT NT 4
NA
Methyl Amyl Ketone 98% 110-43-0 8 0 ASTM F739 1
-
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 4 0 ASTM F739 3
=
Methyl-3-methoxypropionate 100% 3852-09-3 11 1 ASTM F739 3
=
n-hexane 95% 110-54-3 3 0 ASTM F739 1
-
N-methyl-2-Pyrrolidone 99% 872-50-4 50 2 ASTM F739 4
+
N-N dimethyl acetamide 99% 127-19-5 47 2 ASTM F739 NT
NA
Naphtha VM&P mixture 8032-32-4 2 0 ASTM F739 1
-
Nitric acid 10% 7697-37-2 840 5 ASTM F739 4
++
Nitric acid 20% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 40% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 50% 7697-37-2 NT NT 4
NA
Nitric acid 68% 7697-37-2 299 5 EN 374-3:2003 4
++
Nitric acid 70% 7697-37-2 307 5 ASTM F739 4
++
Nitric acid 90% 7697-37-2 7 0 ASTM F739 NT
NA
Nitride Etch mixture NA NT NT 4
NA
Nitrohydrochloric acid (Aqua Regia) mixture 8007-56-5 480 6 ASTM F739 NT
NA
Phenol 85% 108-95-2 102 3 ASTM F739 4
++
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 4
++
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Phosphorus Oxychloride 99% 10025-87-3 15 1 ASTM F739 NT
NA
Piranha Etch mixture NA 243 5 ASTM F739 1
-
Polyethylene glycol octylphenyl ether 100% 9002-93-1 480 6 ASTM F739 NT
NA
Potassium Hydroxide 50% 1310-58-3 480 6 ASTM F739 4
++
Potassium Hydroxide Etch mixture NA 24 1 ASTM F739 NT
NA
Propylene Glycol 99% 57-55-6 480 6 ASTM F739 4
++
Propylene Glycol Methyl Ethyl Acetate (PGMEA) 99% 108-65-6 47 2 ASTM F739 3
+
Propylene Glycol Monomethyl Ether 99% 107-98-2 26 1 ASTM F739 4
+
Silicon Tetrachloride 100% 10026-04-7 15 1 ASTM F739 NT
NA
Slope Etch mixture NA 260 5 ASTM F739 4
++
Sodium hydroxide 20% 1310-73-2 780 5 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 780 5 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 780 5 ASTM F739 4
++
Sulfuric acid 10% 7664-93-9 900 5 ASTM F739 4
++
Sulfuric acid 96% 7664-93-9 102 3 ASTM F739 1
-
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 4 0 ASTM F739 1
-
Tetraethyl Orthosilicate 100% 78-10-4 25 1 ASTM F739 1
-
Tetramethyl Ammonium Hydroxide 25% 75-59-2 480 6 ASTM F739 4
++
Thionylchloride 99% 7719-09-7 15 1 ASTM F739 NT
NA
Toluene 49% Methyl Isobutyl Ketone 34.5% Methyl Ethyl Ketone 16.5% mixture NA 1 0 EN 374-3:2003 NT
NA
Toluene Diisocyanate (TDI) 80% 584-84-9 27 1 ASTM F739 NT
NA
Trichloroethylene 99% 79-01-6 NT NT 1
NA
Trimethylphosphite 97% 121-45-9 10 0 ASTM F739 NT
NA
Unleaded gasoline mixture 8006-61-9 4 0 ASTM F739 1
-
Xylene 99% 1330-20-7 4 0 ASTM F739 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.