Stansolv 519

The chemical protection of nitrile combined with excellent mechanical resistance

  • Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system)
  • Optimal dexterity without compromising chemical resistance
  • Better resistance than natural latex gloves against organic solvents
  • Recommended for people sensitive to the proteins in natural latex

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    3001
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
Material Nitrile
Colour Green
Interior Finish Chlorinated
Exterior Finish Chlorinated
Length (cm) 33
Thickness (mm) 0.30
Size 7 8 9 10
Packaging 1 pair/bag
12 pairs/bag
72 pairs/carton
Critical Environments - Stansolv 519 - situation
Critical Environments - Stansolv 519 - situation

Operating instructions

Instructions for use

  • Persons sensitized to dithiocarbamates and thiazoles should not use these gloves.
  • Unpack and put on the gloves according to the gowning procedure in the workplace. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
  • Put the gloves on dry, clean hands.
  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Take off the gloves without touching the external surface : pull off a first glove and hold it with the gloved hand. Fold back the cuff edge of the second glove over both gloves and discard in appropriate refuse container.

Storage conditions

Store the gloves in their packaging protected from light, humidity and heat.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
2-Propanol (Isopropanol) 99% 67-63-0 358 5 EN 374-3:2003 4
++
Butyl Acetate 99% 123-86-4 12 1 EN 374-3:2003 1
-
Hydrochloric acid 10% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Hydrochloric acid 35% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Methanol 99% 67-56-1 12 1 EN 374-3:2003 1
-
n-Heptane 99% 142-82-5 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 96% 7664-93-9 11 1 EN 374-3:2003 NT
NA
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 42 2 EN 374-3:2003 2
=
Toluene 99% 108-88-3 6 0 EN 374-3:2003 1
-
Xylene 99% 1330-20-7 11 1 EN 374-3:2003 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.