Ultranitril 485

Good sensitivity for standard chemical protection

  • Excellent dexterity, due to the suppleness of the glove
  • Good grip on slippery objects, due to the embossed exterior finish


  • Automotive/mechanical industry
    • Machining parts using cutting oil
  • Other industries
    • Maintenance
    • Timber treatment and finishing
    • Application of phytosanitary products
  • Chemical industry
    • Manufacture and application of paints and varnishes

Product details

  • Cat. 3
  • Mechanical hazards EN 388
  • Type B
    Specific Chemical Protection EN 374
  • Micro-organisms EN 374
Material Nitrile
Colour Green
Interior Finish Flocked
Exterior Finish Embossed texture
Length (cm) 31
Thickness (mm) 0.34
Size 7 8 9 10
Packaging 12 pairs/bag
72 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • Persons sensitized to dithiocarbamates and thiazoles should not use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from light, humidity and heat.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (alcohols, diluents, etc.) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves in use with under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to any cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.


This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).


Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
Standard Degradation
Acetic acid 99% 64-19-7 28 1 EN 16523-1:2015 NT
Ammonium hydroxide solution 25% 1336-21-6 124 4 EN 16523-1:2015 NT
Carbon disulfide 99% 75-15-0 4 0 ASTM F739 NT
Diethylamine 98% 109-89-7 16 1 ASTM F739 NT
Dimethylformamide 99% 68-12-2 11 1 ASTM F739 1
Hydrogen peroxide 30% 7722-84-1 480 6 EN 16523-1:2015 NT
Methanol 85% 67-56-1 NT NT 4
Methanol 99% 67-56-1 24 1 ASTM F739 4
n-Heptane 99% 142-82-5 480 6 EN 374-3:2003 NT
n-hexane 95% 110-54-3 480 6 ASTM F739 4
Nitrobenzene 99% 98-95-3 20 1 ASTM F739 NT
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 NT
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
Sulfuric acid 96% 7664-93-9 60 2 ASTM F739 NT
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 52 2 ASTM F739 NT
Tetrahydrofurane 99% 109-99-9 4 0 ASTM F739 NT
Toluene 99% 108-88-3 9 0 ASTM F739 NT

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.