Ultranitril 365

Handling glove with a chemical protection

  • Excellent grip when handling very oily parts that prevents risk from dropping object and reduce muscle fatigue
  • Dexterity and comfort due to the anatomical shape and a seamless liner
  • High durability


  • Automotive/mechanical industry
    • Mechanical maintenance
    • Assembly of small oily parts
  • Chemical industry
    • Common handling Tasks
    • Sampling chemicals
  • Industrial maintenance
    • Handling oily mechanical parts
    • Mechanical maintenance

Product details

  • Cat. 3
  • Mechanical hazards EN 388
  • Specific Chemical Protection EN 374
Material Nitrile GRIP&PROOF coating
Colour Black / Purple
Interior Finish Seamless textile support
Exterior Finish Fully-coated
Length (cm) 25 - 27
Thickness (mm)
Size 7 8 9 10
Packaging 1 pair/bag
12 pairs/bag
96 pairs/carton
Chemical Protection - Ultranitril 365 - situation
Chemical Protection - Ultranitril 365 - situation

Operating instructions

Instructions for use

• It is recommended that you pre-test the gloves as the actual workplace conditions of use may differ
from those of the CE type tests (in particular mechanical and/or chemical), according to temperature,
abrasion and degradation.
•Persons sensitized to dithiocarbamates and thiazoles should not use these gloves.
.Do not use them next to moving machinery.
•Put the gloves on dry, clean hands
•Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
•Inspect the gloves for cracks or snags before reusing them.

Storage conditions

• Store the gloves in their original packaging away from light, heat and humidity.

Laundering conditions

Before taking off the gloves, clean them as appropriate :
•in use with paints, pigments and inks : wipe with a clean cloth dampened
with a suitable solvent, and rub over with a dry cloth.
•in use with a solvent (dilents, etc...) : rub over with a dry cloth.
•in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth
Caution : improper use of the gloves or submitting them to any cleaning or laundering process can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.


This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).


Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
Standard Degradation
Ammonium hydroxide solution 25% 1336-21-6 314 5 EN 374-3:2003 4
Formaldehyde 37% 50-00-0 480 6 EN 374-3:2003 4
Hydrogen peroxide 30% 7722-84-1 480 6 EN 374-3:2003 NT
n-Heptane 99% 142-82-5 480 6 EN 374-3:2003 4
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
Sulfuric acid 96% 7664-93-9 11 1 EN 374-3:2003 NT

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.