alto 298

Good mechanical performance for long-lasting chemical protection

  • Longer service life and good impact protection, due to the thickness of the material
  • Forearm protection. Length: 42cm
  • Previous name : Industrial 298

Applications

  • Other industries
    • Pharmaceutical industry
    • Maintenance in wet environments
  • Mechanical industry
    • Maintenance in wet environments (water, oil, greases, hydrocarbons)

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    3131X
  • Specific Chemical Protection EN 374
    AKLMPT
  • Micro-organisms EN 374
Material Natural latex
Colour Blue
Interior Finish Chlorinated
Exterior Finish Smooth
Length (cm) 42
Thickness (mm) 1.00
Size 8 9 10
Packaging 1 pair/bag
5 pairs/bag
50 pairs/carton
Chemical Protection - alto 298 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitised to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands. For added comfort, it is recommended to wear a cotton underglove.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate:

  • in use with a solvent (cetones, etc...) : rub over with a dry cloth.
  • in use with acids or alkalies : thoroughly rinse the gloves under running water,and rub over with a dry cloth.

Caution: improper use of the gloves or submitting them to another cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.